Services Offered in the Middle East Region
In
addition to the services delivered within the Middle East Region as
listed below, our branches can also act as gateways to the full
worldwide service capabilities of Exova.
Metallurgy & Coatings Testing
Services
- Mechanical
Testing of Metals
Routine – Tensile & Compression (20N to 1000kN), Charpy,
Hardness, Fracture and Bend
Specialist – Fracture Toughness (CTOD)
- Corrosion
Testing including sour service (HIC, SSCC, Salt Spray)
- Chemical
Analysis (ICP, OES, AAS, IRC)
- Failure
investigations & Metallography
- On-site
metallurgical services – PMI, hardness, metallographic replication
- Full
range of short & long-term coatings tests
|
 |
Construction / Civil Engineering Materials
Testing Services
- Aggregates
& Soils
- Concrete
& Cements
- Water
/ wastewater
- Rocks
- Metals
/ Steel
- Plastics
- Sealants,
Liners and Geotextiles
- Paints,
Coatings and Coverings
- Additives
& Admixtures
|
 |
Environmental Monitoring and Analysis
Services
- Ambient
Air Quality Monitoring
- Stack
& Process Emission Monitoring
- Indoor
Air Quality
- Asbestos
Monitoring, Surveys & Advice
- Contamination
/ Pollution Studies
- Environmental
Chemistry : organics, inorganics, metals using ICP, GCMS, OES, IRC and
wet chemistry
- Noise
& Vibration Monitoring
- Microbiological
Analysis
|
 |
Chemistry & Analytical Services
- Metals,
waters / wastewaters, ores, paints, corrosion inhibitors etc
- organics,
inorganics, metals
- ICP,
GCMS, IRC, AAS, FID, wet chemistry
- PMI
– XRF, OES
|
 |
Ground Engineering, Foundation Surveys and
Pile Testing
- Soil
& Rock Mechanics
- Geophysical
Surveys
- Ground
Penetrating Radar
- Geological
Surveys / Minerals Resources
- Piled
Foundation Inspection & Testing Including Integrity, Sonic
Logging,
Caliper Logging, Dynamic Testing, Load Testing and Instrumentation
(Strain Gauges etc)
|
 |
Specialist Civil Engineering Services
- Concrete
Investigations and Interpretation
- Structural
Load Testing and Surveys
- Thermocoupling
Investigations of Concrete
- Strain
Gauge Installation and Monitoring
- Diamond
Coring, Cutting and Selective Demolition
- Curtain
Wall / Façade Testing
|
 |
Plastics, Polymers, Composites &
Pipeline Inspection
- Mechanical
& Chemical Testing
- Batch
/ Production QC Testing
- Strain
and Creep Testing
- Crack
Growth Analysis
- Site
Pipeline Installation Audits and Field Testing
|
 |
Establishment of ‘On Site’ Laboratories
- Exova
has unrivalled experience in setting up and managing on-site testing
laboratories with UKAS accreditation to ISO/IEC 17025 on major projects
throughout the Middle East.
- It
is
critical that project clients and property owners protect their
investment by ensuring that the materials used in the project satisfy
international and project specific requirements.
|
 |
|
