- Aerospace
- Services
- Aerospace Engineering Consultants
- Aerospace Composite Analysis and Manufacturing
- Aerospace Polymer Testing and Plastics Testing
- Aircraft Interiors Testing
- Chemical Analysis
- Corrosion Technology
- Engine Fluids Analysis
- Failure Analysis Lab Services
- Fatigue Analysis
- Fire Testing
- Materials Selection
- Metallurgical Testing Lab Services
- Metallographic Evaluations
- Mechanical Testing Lab Services
- Nadcap Approved Labs
- Non Destructive Testing for Aerospace
- Polymer Analysis Lab Services
- Shock Test
- Surface Technology
- By Laboratory
- By Method
- Bend Testing
- Charpy Impact Test
- Composition Analysis of Scales (Corrosion)
- Creep/Stress Rupture Testing
- Drop Weight Test
- Elevated Temperature Testing (ASTM E21)
- Fatigue Analysis
- Fracture Toughness Testing
- Graphite Furnace Atomic Absorption
- Hardness Test
- Hydrogen Embrittlement
- Salt Spray
- Shock Test
- Vibration Testing
- Services
- Automotive & Transportation
- Services
- By Laboratory
- By Method
- Airbag Development & Verification Testing
- Automotive Interiors Component Testing
- Automotive Materials Test
- Electrical Components Evaluations
- Engine Durability & Emissions
- Engineering Services & Support
- Environmental Conditioning
- Exhaust System Performance & Evaluation
- Full Vehicle Structural Durability
- Heavy Duty Road Simulations
- Plastic Pipe & Fittings Evaluations
- Construction
- Services
- Accelerated Weather Test
- Asbestos Testing
- Building Performance
- Building Products Evaluation
- Causes of Building Failure
- Cladding and Curtain Wall Testing
- Coating Inspection Report
- Construction Polymer Testing and Plastics Testing
- Corrosion Testing Services
- Dye Penetrant Inspection
- Fenestration Evaluation
- Fire Test Services
- Guardrail & Decking Evaluations
- HVAC Performance
- NDT Testing
- Metallurgical Testing Labs
- Photovoltaic Testing
- Solar Testing
- Ultrasonic NDT
- Wall & Air Barrier Systems
- Welding Services
- Wind Load Simulation
- By Laboratory
- Abu Dhabi, United Arab Emirates
- Brisbane, Australia
- Dammam, Saudi Arabia
- Doha, Qatar
- Dubai (Al Futtaim), United Arab Emirates
- Dubai (Cladding Division), United Arab Emirates
- Kowloon, Hong Kong
- London, UK
- Manchester, UK
- Melbourne, Australia
- Mississauga, Canada
- Muscat, Oman
- Sohar, Oman
- Sydney, Australia
- Warrington, UK
- Willenhall, UK
- By Method
- Services
- Defense
- Environmental
- Services
- Agricultural Soil Testing
- Air Quality Testing
- Asbestos Testing
- Environmental Monitoring Assessment
- Environmental Toxicology
- Groundwater Well Installation and Soil Sampling
- Legionella Testing
- Medical Gas Services
- Noise Monitoring
- Pesticide Analysis
- Plant Tissue Lab Services
- Soil Testing Lab Services
- Stack Sampling and Emission Monitoring
- Waste Classification
- Water Quality Testing
- Well Water Quality Testing
- Exova Environmental Seminars
- By Laboratory
- Calgary 37th Ave, Canada
- Camberley, UK
- Dammam, Saudi Arabia
- Doha, Qatar
- Drayton Valley, Canada
- Dubai, United Arab Emirates
- Edmonton, Canada
- Fort St. John, Canada
- Glasgow, UK
- Grande Prairie, Canada
- Kingston, Canada
- Mississauga, Canada
- Muscat, Oman
- St. Catharines, Canada
- Ottawa, Canada
- Pointe-Claire, Canada
- Runcorn, UK
- Saguenay, Canada
- Santa Fe Springs, US
- St-Bruno, Canada
- Ste-Foy, Canada
- Surrey, Canada
- By Method
- Services
- Metallurgy & General Engineering
- Services
- Charpy Impact Test
- Coating Inspection Report
- Component Testing
- Corrosion Testing Services
- Creep Stress Rupture Testing
- Failure Analysis Lab Services
- Fatigue Testing Lab Services
- Hardness Test
- Material Selection
- Mechanical Testing Lab Services
- Metallographic Evaluations
- Metals Chemical Analysis
- Microstructure Analysis
- N.D.T. Testing
- Polymer Testing and Plastics Testing
- Railroad Services
- Scanning Electron Microscopy SEM
- Specialist Engineering
- Tensile Testing Lab Services
- Ultrasonic N.D.T.
- Welding Services
- By Laboratory
- Abu Dhabi, United Arab Emirates
- Bridgwater, UK
- Burlington, Canada
- Cambridge, Canada
- Crema, Italy
- Doha, Qatar
- Daventry, UK
- Dubai, United Arab Emirates
- Dudley, UK
- Edinburgh, UK
- Emmen, The Netherlands
- Gary, US
- Glendale Heights, US
- Houston, US
- Karlskoga, Sweden
- Linköping, Sweden
- Lancaster, UK
- Mississauga, Canada
- Muscat, Oman
- Nyköping, Sweden
- Padova, Italy
- Piacenza, Italy
- Plzeň, Czech Republic
- Pointe-Claire, Canada
- Portland, US
- Rotterdam, The Netherlands
- Salford, UK
- Sandnes, Norway
- Santa Fe Springs (Alburtis), US
- Santa Fe Springs (Freeman), US
- Shotton, UK
- Spijkenisse, The Netherlands
- Teesside, UK
- Toulouse, France
- By Method
- Bend Testing
- Charpy Impact Test
- Drop Weight Test
- Elevated Temperature Testing (ASTM E21)
- Fracture Toughness Testing
- Gas Analysis (Metals)
- Glow Discharge/Mass Spectrometry
- Hardness Brinell Test
- Hardness Rockwell Test
- Hardness Vickers Test
- Hydrogen Embrittlement
- Micro Hardness Test
- Magnetic Particle Inspection
- Microprobe Analysis (EDS)
- Salt Spray
- Shock Testing
- Shear Wave Inspection
- Ultrasonic Flaw Detection
- Ultrasonic Thickness Measurement
- Services
- Food and Consumer Products
- Services
- By Test Category
- Allergens
- Contaminants
- Ecotoxicology
- Food Chemistry
- Food Microbiology
- Minerals and Metals
- Neutriceuticals and Supplements
- Non-Food Laboratory Testing
- Nutritional Analysis and Labelling
- Pesticide Residues
- Residues and Organics
- Shelf Life Determination
- Vitamin E Analysis
- Vitamin Analysis, USP, GMP
- Vitamins by USP Methods
- Water Chemistry and Water Microbiology
- By Laboratory
- Oil & Gas
- Services
- ASTM Fuel Testing
- Coating Testing and Consultancy
- Conventional and oil sands core testing
- Core Analysis
- Corrosion Testing
- Environmental Monitoring Assessment
- Failure Analysis and Expert Witness Services
- Geotechnical Services
- Metallurgical Testing
- Metals Testing for Pipelines
- Oil Testing
- Onsite Testing
- Petroleum Testing Services
- Pipe Reeling and Impact Studies
- Pipeline Corrosion Services
- Pipeline Coating Testing
- Pipeline Failure Assessment
- Pipeline Inspection Services
- Polymer Testing and Plastics Testing
- Reservoir Engineering
- Reservoir Fluid Analysis
- Specialist Engineering
- Sour Service Corrosion Testing
- Welder Performance Qualification
- Welder Certification and Consultancy
- By Laboratory
- Aberdeen, Uk
- Abu Dhabi, United Arab Emirates
- Calgary 12th St, Canada
- Calgary 37th Ave, Canada
- Crema, Italy
- Daventry, UK
- Doha Qatar
- Drayton Valley, Canada
- Dubai, United Arab Emirates
- Dudley, UK - Exova Corrosion Centre
- Edmonton, Canada
- Edinburgh, UK
- Emmen, The Netherlands
- Houston, US
- Kingdom of Saudi Arabia
- Muscat, Oman
- Padova, Italy
- Piacenza, Italy
- Rotterdam, The Netherlands
- Salford, UK
- Sandnes, Norway
- Singapore
- Spijkenisse, The Netherlands
- Teesside, UK
- By Method
- Bend Testing
- Charpy Impact Test
- Drop Weight Test
- Elevated Temperature Testing (ASTM E21)
- Fracture Toughness Testing
- Gas Analysis (Metals)
- Glow Discharge/Mass Spectrometry
- Hardness Brinell Test
- Hardness Rockwell Test
- Hardness Vickers Test
- Hydrogen Embrittlement
- Micro Hardness Test
- Magnetic Particle Inspection
- Microprobe Analysis (EDS)
- Shock Testing
- Shear Wave Inspection
- Ultrasonic Flaw Detection
- Ultrasonic Thickness Measurement
- Services
- Pharmaceuticals
- Services
- Analytical Method Development and Validation
- Analytical R&D Services
- Analytical Testing and Materials Analysis
- Batch Release Testing
- Biological Testing and Analysis
- Clinical Trial Materials Manufacturing and Supply
- Combination Products and Development
- Extractables/Leachables Studies
- Heavy Metals by USP
- Medical Device Testing and Development
- NMR Spectroscopy
- Physical Characterization
- Preformulation and Formulation Development
- Polymer Testing and Plastics Testing
- Raw Materials Testing
- Residual Solvents by USP
- Regulatory Consulting Services
- Stability Studies
- Trace Metals Analysis by ICPMS
- USP Container Testing
- By Laboratory
- Instrumentation
- By Method
- Chromatography
- EDAX Analysis
- Electrophoretic Methods
- Elemental Analysis
- Fourier Transform Infrared Spectroscopy
- Immunoassay Development and Validation
- Ion Chromatography
- Nuclear Magnetic Resonance
- Particle Morphology
- Particle Size Analysis
- Particulate Matter
- Residual Solvents
- Trace Metal Analysis
- Trace Organic Analysis
- X-ray Diffraction
- X-ray Fluorescence
- Technical Articles
- Services
- Telecom / Electronics
- Utilities
- Services
- By Laboratory
- By Method
- Abrasion Testing
- Accelerated Ageing
- Compressive Properties
- Density and Specific Gravity
- Dynamic Mechanical Analysis (DMA)
- Differential Scanning Calorimetry
- Fourier Transform Infrared Spectroscopy (FTIR)
- Gel Permeation Chromatography (GPC)
- Hardness Testing
- Izod and Charpy Impact Tests
- Long-term Flexural Creep and Environmental Stress Cracking
- Melt Flow Rate (MFR)
- Polymer Processing
- Shear Strength
- Tensile Properties
- Tear Testing
- TGA
- Water Absorption
- Power Generation & Renewables
- Services
- By Laboratory
- Abu Dhabi, United Arab Emirates
- Anaheim, US
- Bridgwater, UK
- Burlington, Canada
- Cambridge, Canada
- Crema, Italy
- Daventry, UK
- Dubai, United Arab Emirates
- Gary, US
- Glendale Heights, US
- Houston, US
- Karlskoga, Sweden
- Linköping, Sweden
- Mississauga, Canada
- Monterrey, Mexico
- Muscat, Oman
- Newcastle, UK
- Plzeň, Czech Republic
- Pointe-Claire, Canada
- Portland, US
- Salford, UK
- Santa Fe Springs (Alburtis), US
- Singapore
- Toulouse, France
- By Method
Home 
Industry Sectors Pharmaceuticals Technical Articles
Industry Sectors Pharmaceuticals Technical Articles
Pharma Technical Articles
Contact Us
Americas
T: +1 866 263 9268
E: americas@exova.com
E: americas@exova.com
Europe
T: +44 (0)161 787 3291
E: europe@exova.com
E: europe@exova.com
Middle East
T: +971 (4) 439 5800
E: middleeast@exova.com
E: middleeast@exova.com
Asia
T: +65 63725600
E: asia@exova.com
E: asia@exova.com
Asia Pacific
T: +61 (0) 3 97671000
E: asiapacific@exova.com
E: asiapacific@exova.com
Related Links
