- Aerospace
- Services
- Aerospace Engineering Consultants
- Aerospace Composite Analysis and Manufacturing
- Aerospace Polymer Testing and Plastics Testing
- Aircraft Interiors Testing
- Chemical Analysis
- Corrosion Technology
- Engine Fluids Analysis
- Failure Analysis Lab Services
- Fatigue Analysis
- Fire Testing
- Materials Selection
- Metallurgical Testing Lab Services
- Metallographic Evaluations
- Mechanical Testing Lab Services
- Nadcap Approved Labs
- Non Destructive Testing for Aerospace
- Polymer Analysis Lab Services
- Shock Test
- Surface Technology
- By Laboratory
- By Method
- Bend Testing
- Charpy Impact Test
- Composition Analysis of Scales (Corrosion)
- Creep/Stress Rupture Testing
- Drop Weight Test
- Elevated Temperature Testing (ASTM E21)
- Fatigue Analysis
- Fracture Toughness Testing
- Graphite Furnace Atomic Absorption
- Hardness Test
- Hydrogen Embrittlement
- Salt Spray
- Shock Test
- Vibration Testing
- Services
- Automotive & Transportation
- Services
- By Laboratory
- By Method
- Airbag Development & Verification Testing
- Automotive Interiors Component Testing
- Automotive Materials Test
- Electrical Components Evaluations
- Engine Durability & Emissions
- Engineering Services & Support
- Environmental Conditioning
- Exhaust System Performance & Evaluation
- Full Vehicle Structural Durability
- Heavy Duty Road Simulations
- Plastic Pipe & Fittings Evaluations
- Construction
- Services
- Accelerated Weather Test
- Asbestos Testing
- Building Performance
- Building Products Evaluation
- Causes of Building Failure
- Cladding and Curtain Wall Testing
- Coating Inspection Report
- Construction Polymer Testing and Plastics Testing
- Corrosion Testing Services
- Dye Penetrant Inspection
- Fenestration Evaluation
- Fire Test Services
- Guardrail & Decking Evaluations
- HVAC Performance
- NDT Testing
- Metallurgical Testing Labs
- Photovoltaic Testing
- Solar Testing
- Ultrasonic NDT
- Wall & Air Barrier Systems
- Welding Services
- Wind Load Simulation
- By Laboratory
- Abu Dhabi, United Arab Emirates
- Brisbane, Australia
- Dammam, Saudi Arabia
- Doha, Qatar
- Dubai (Al Futtaim), United Arab Emirates
- Dubai (Cladding Division), United Arab Emirates
- Kowloon, Hong Kong
- London, UK
- Manchester, UK
- Melbourne, Australia
- Mississauga, Canada
- Muscat, Oman
- Sohar, Oman
- Sydney, Australia
- Warrington, UK
- Willenhall, UK
- By Method
- Services
- Defense
- Environmental
- Services
- Agricultural Soil Testing
- Air Quality Testing
- Asbestos Testing
- Environmental Monitoring Assessment
- Environmental Toxicology
- Groundwater Well Installation and Soil Sampling
- Legionella Testing
- Medical Gas Services
- Noise Monitoring
- Pesticide Analysis
- Plant Tissue Lab Services
- Soil Testing Lab Services
- Stack Sampling and Emission Monitoring
- Waste Classification
- Water Quality Testing
- Well Water Quality Testing
- By Laboratory
- Calgary 37th Ave, Canada
- Camberley, UK
- Dammam, Saudi Arabia
- Doha, Qatar
- Drayton Valley, Canada
- Dubai, United Arab Emirates
- Edmonton, Canada
- Fort St. John, Canada
- Glasgow, UK
- Grande Prairie, Canada
- Kingston, Canada
- Mississauga, Canada
- Muscat, Oman
- St. Catharines, Canada
- Ottawa, Canada
- Pointe-Claire, Canada
- Runcorn, UK
- Santa Fe Springs, US
- St-Bruno, Canada
- Ste-Foy, Canada
- Surrey, Canada
- By Method
- Services
- Metallurgy & General Engineering
- Services
- Charpy Impact Test
- Coating Inspection Report
- Component Testing
- Corrosion Testing Services
- Creep Stress Rupture Testing
- Failure Analysis Lab Services
- Fatigue Testing Lab Services
- Hardness Test
- Material Selection
- Mechanical Testing Lab Services
- Metallographic Evaluations
- Metals Chemical Analysis
- Microstructure Analysis
- N.D.T. Testing
- Polymer Testing and Plastics Testing
- Railroad Services
- Scanning Electron Microscopy SEM
- Specialist Engineering
- Tensile Testing Lab Services
- Ultrasonic N.D.T.
- Welding Services
- By Laboratory
- Abu Dhabi, United Arab Emirates
- Bridgwater, UK
- Burlington, Canada
- Cambridge, Canada
- Crema, Italy
- Doha, Qatar
- Daventry, UK
- Dubai, United Arab Emirates
- Dudley, UK
- Edinburgh, UK
- Emmen, The Netherlands
- Gary, US
- Glendale Heights, US
- Houston, US
- Karlskoga, Sweden
- Linköping, Sweden
- Lancaster, UK
- Mississauga, Canada
- Muscat, Oman
- Nyköping, Sweden
- Padova, Italy
- Piacenza, Italy
- Plzeň, Czech Republic
- Pointe-Claire, Canada
- Portland, US
- Rotterdam, The Netherlands
- Salford, UK
- Sandnes, Norway
- Santa Fe Springs (Alburtis), US
- Santa Fe Springs (Freeman), US
- Shotton, UK
- Spijkenisse, The Netherlands
- Teesside, UK
- Toulouse, France
- By Method
- Bend Testing
- Charpy Impact Test
- Drop Weight Test
- Elevated Temperature Testing (ASTM E21)
- Fracture Toughness Testing
- Gas Analysis (Metals)
- Glow Discharge/Mass Spectrometry
- Hardness Brinell Test
- Hardness Rockwell Test
- Hardness Vickers Test
- Hydrogen Embrittlement
- Micro Hardness Test
- Magnetic Particle Inspection
- Microprobe Analysis (EDS)
- Salt Spray
- Shock Testing
- Shear Wave Inspection
- Ultrasonic Flaw Detection
- Ultrasonic Thickness Measurement
- Services
- Food and Consumer Products
- Services
- By Test Category
- Allergens
- Contaminants
- Ecotoxicology
- Food Chemistry
- Food Microbiology
- Minerals and Metals
- Neutriceuticals and Supplements
- Non-Food Laboratory Testing
- Nutritional Analysis and Labelling
- Pesticide Residues
- Residues and Organics
- Shelf Life Determination
- Vitamin E Analysis
- Vitamin Analysis, USP, GMP
- Vitamins by USP Methods
- Water Chemistry and Water Microbiology
- By Laboratory
- Oil & Gas
- Services
- ASTM Fuel Testing
- Coating Testing and Consultancy
- Conventional and oil sands core testing
- Core Analysis
- Corrosion Testing
- Environmental Monitoring Assessment
- Failure Analysis and Expert Witness Services
- Geotechnical Services
- Metallurgical Testing
- Metals Testing for Pipelines
- Oil Testing
- Onsite Testing
- Petroleum Testing Services
- Pipe Reeling and Impact Studies
- Pipeline Corrosion Services
- Pipeline Coating Testing
- Pipeline Failure Assessment
- Pipeline Inspection Services
- Polymer Testing and Plastics Testing
- Reservoir Engineering
- Reservoir Fluid Analysis
- Specialist Engineering
- Sour Service Corrosion Testing
- Welder Performance Qualification
- Welder Certification and Consultancy
- By Laboratory
- Aberdeen, Uk
- Abu Dhabi, United Arab Emirates
- Calgary 12th St, Canada
- Calgary 37th Ave, Canada
- Crema, Italy
- Daventry, UK
- Doha Qatar
- Drayton Valley, Canada
- Dubai, United Arab Emirates
- Dudley, UK - Exova Corrosion Centre
- Edmonton, Canada
- Edinburgh, UK
- Emmen, The Netherlands
- Houston, US
- Kingdom of Saudi Arabia
- Muscat, Oman
- Padova, Italy
- Piacenza, Italy
- Rotterdam, The Netherlands
- Salford, UK
- Sandnes, Norway
- Singapore
- Spijkenisse, The Netherlands
- Teesside, UK
- By Method
- Bend Testing
- Charpy Impact Test
- Drop Weight Test
- Elevated Temperature Testing (ASTM E21)
- Fracture Toughness Testing
- Gas Analysis (Metals)
- Glow Discharge/Mass Spectrometry
- Hardness Brinell Test
- Hardness Rockwell Test
- Hardness Vickers Test
- Hydrogen Embrittlement
- Micro Hardness Test
- Magnetic Particle Inspection
- Microprobe Analysis (EDS)
- Shock Testing
- Shear Wave Inspection
- Ultrasonic Flaw Detection
- Ultrasonic Thickness Measurement
- Services
- Pharmaceuticals
- Services
- Analytical Method Development and Validation
- Analytical R&D Services
- Analytical Testing and Materials Analysis
- Batch Release Testing
- Biological Testing and Analysis
- Clinical Trial Materials Manufacturing and Supply
- Combination Products and Development
- Extractables/Leachables Studies
- Heavy Metals by USP
- Medical Device Testing and Development
- NMR Spectroscopy
- Physical Characterization
- Preformulation and Formulation Development
- Polymer Testing and Plastics Testing
- Raw Materials Testing
- Residual Solvents by USP
- Regulatory Consulting Services
- Stability Studies
- Trace Metals Analysis by ICPMS
- USP Container Testing
- By Laboratory
- Instrumentation
- By Method
- Chromatography
- EDAX Analysis
- Electrophoretic Methods
- Elemental Analysis
- Fourier Transform Infrared Spectroscopy
- Immunoassay Development and Validation
- Ion Chromatography
- Nuclear Magnetic Resonance
- Particle Morphology
- Particle Size Analysis
- Particulate Matter
- Residual Solvents
- Trace Metal Analysis
- Trace Organic Analysis
- X-ray Diffraction
- X-ray Fluorescence
- Technical Articles
- Services
- Telecom / Electronics
- Utilities
- Services
- By Laboratory
- By Method
- Abrasion Testing
- Accelerated Ageing
- Compressive Properties
- Density and Specific Gravity
- Dynamic Mechanical Analysis (DMA)
- Differential Scanning Calorimetry
- Fourier Transform Infrared Spectroscopy (FTIR)
- Gel Permeation Chromatography (GPC)
- Hardness Testing
- Izod and Charpy Impact Tests
- Long-term Flexural Creep and Environmental Stress Cracking
- Melt Flow Rate (MFR)
- Polymer Processing
- Shear Strength
- Tensile Properties
- Tear Testing
- TGA
- Water Absorption
- Power Generation & Renewables
- Services
- By Laboratory
- Abu Dhabi, United Arab Emirates
- Anaheim, US
- Bridgwater, UK
- Burlington, Canada
- Cambridge, Canada
- Crema, Italy
- Daventry, UK
- Dubai, United Arab Emirates
- Gary, US
- Glendale Heights, US
- Houston, US
- Karlskoga, Sweden
- Linköping, Sweden
- Mississauga, Canada
- Monterrey, Mexico
- Muscat, Oman
- Newcastle, UK
- Plzeň, Czech Republic
- Pointe-Claire, Canada
- Portland, US
- Salford, UK
- Santa Fe Springs (Alburtis), US
- Singapore
- Toulouse, France
- By Method
Home 
Industry Sectors Aerospace
Industry Sectors Aerospace
Aerospace Solutions
Exova works with the Aerospace industry to drive change through innovation. We recognise the industry's need for lighter airframes which improve operational efficiency and reduce CO2 emissions.
|
|||
|
|
|||
Contact Us
Americas
T: +1 866 263 9268
E: americas@exova.com
E: americas@exova.com
Europe
T: +44 (0)161 787 3291
E: europe@exova.com
E: europe@exova.com
Middle East
T: +971 (4) 439 5800
E: middleeast@exova.com
E: middleeast@exova.com
Asia
T: +65 63725600
E: asia@exova.com
E: asia@exova.com
Asia Pacific
T: +61 (0) 3 97671000
E: asiapacific@exova.com
E: asiapacific@exova.com
